loop cone

Firstimpressions / PlayScape Collection

product specifications

Loop Cone is a multi-purpose unit. When positioned in the middle of a Loop it becomes a backrest as well as a planter. On its own it becomes a self-contained up- or downward facing planter.

Loop Cone was originally created as a backrest for Loop. During the design process Loop Cone became a multifunctional product in its own right.
The final design of Loop Cone works as a backrest, a planter, a table and a seat.

TECHNICAL DATA

Material

Rotation moulded polyethylene, 6-7 mm thick, dyed. Moulded in one piece. UV-resistant, stands up to weather, wear and tear. The material is suitable for granulation and recycling.

Surfaces and friction
The products have a textured/granulated surface due to abrasive blasting of the mold. This process enhances the friction and makes the surface less slippery.

Certifications

TÜV approved as playground equipment acc. EN1176.

Dimensions
Outside diameter: Ø1130mm/Ø810 x H700mm. Inside diameter: Ø720/380mm
Inner volume for e.g. plants: 170L

Fixation
Loop Cone may be filled with water or sand through an integrated pipe or attached to the ground with fittings.

Combinations
Loop Cone works as a self-contained table or planter or combines with #135 Loop, #137 Loop Arc, and #157 HopOp500.

Maintenance
This product withstands most cleaning agents and chemicals and can be cleaned using a high-pressure cleaner. The colour can be revived using vinyl cleaner or similar

Product code
169 0101 Loop Cone red /                  22kg
169 0102 Loop Cone limegreen /       22kg
169 0103 Loop Cone orange /            22kg
169 0104 Loop Cone yellow /             22kg
169 0109 Loop Cone purple /             22kg
169 0111 Loop Cone sandstone /       22kg
169 0113 Loop Cone grey /                22kg
169 0117 Loop Cone blue/                 22kg
169 0115 Loop Cone pastel blue /     22kg
169 0116 Loop Cone mokka brown / 22kg
169 0118 Loop Cone olive green /     22kg
169 0150 Loop Cone white /              22kg
B11 Bracket for surface fixation Cone Ø1130
B12 Brackets for surface fixation Cone Ø810
B13 Connection and fixation bracket f. Cone-Loop

Tender

When positioned in the middle of a Loop it becomes a backrest as well as a planter. On its own it becomes a self-contained up- or downward facing planter.
Material: Rotation moulded polyethylene, 6mm thick, dyed.
Dimensions: Outside diameter: Ø1130mm/Ø810 x H700mm. Inside diameter: Ø720/380mm
Fixation: Fill with water/sand through integrated plugs or surface fixation. Brackets to be ordred separately..

STANDARD COLORS (Approx RAL)

red RAL 3020

limegreen RAL 120 70 60

orange RAL 2003

VARIANT COLORS (Approx RAL)

yellow RAL 1018

purple RAL 4004

sandstone

grey RAL 7015

blue RAL 5010

pastel blue RAL 5024

brown RAL 8028

olive green RAL 6025

white RAL 9003