Firstimpressions / PlayScape Collection
Loop Cone is a multi-purpose unit. When positioned in the middle of a Loop it becomes a backrest as well as a planter. On its own it becomes a self-contained up- or downward facing planter.
Loop Cone was originally created as a backrest for Loop. During the design process Loop Cone became a multifunctional product in its own right.
The final design of Loop Cone works as a backrest, a planter, a table and a seat.
Rotation moulded polyethylene, 6-7 mm thick, dyed. Moulded in one piece. UV-resistant, stands up to weather, wear and tear. The material is suitable for granulation and recycling.
Surfaces and friction
The products have a textured/granulated surface due to abrasive blasting of the mold. This process enhances the friction and makes the surface less slippery.
TÜV approved as playground equipment acc. EN1176.
Outside diameter: Ø1130mm/Ø810 x H700mm. Inside diameter: Ø720/380mm
Inner volume for e.g. plants: 170L
Loop Cone may be filled with water or sand through an integrated pipe or attached to the ground with fittings.
Loop Cone works as a self-contained table or planter or combines with #135 Loop, #137 Loop Arc, and #157 HopOp500.
This product withstands most cleaning agents and chemicals and can be cleaned using a high-pressure cleaner. The colour can be revived using vinyl cleaner or similar
169 0101 Loop Cone red / 22kg
169 0102 Loop Cone limegreen / 22kg
169 0103 Loop Cone orange / 22kg
169 0104 Loop Cone yellow / 22kg
169 0109 Loop Cone purple / 22kg
169 0111 Loop Cone sandstone / 22kg
169 0113 Loop Cone grey / 22kg
169 0117 Loop Cone blue/ 22kg
169 0115 Loop Cone pastel blue / 22kg
169 0116 Loop Cone mokka brown / 22kg
169 0118 Loop Cone olive green / 22kg
169 0150 Loop Cone white / 22kg
B11 Bracket for surface fixation Cone Ø1130
B12 Brackets for surface fixation Cone Ø810
B13 Connection and fixation bracket f. Cone-Loop
When positioned in the middle of a Loop it becomes a backrest as well as a planter. On its own it becomes a self-contained up- or downward facing planter.
Material: Rotation moulded polyethylene, 6mm thick, dyed.
Dimensions: Outside diameter: Ø1130mm/Ø810 x H700mm. Inside diameter: Ø720/380mm
Fixation: Fill with water/sand through integrated plugs or surface fixation. Brackets to be ordred separately..
Standard colours (approx. RAL)
Red: RAL 3020
Limegreen: RAL 120 70 60
Orange: RAL 2003
Variant colours (approx. RAL)
Yellow: RAL 1018
Purple: RAL 4004
Grey: RAL 7015
Blue: RAL 5010
Pastel blue: RAL 5024
Mokka brown: RAL 8028
Olive green: RAL 6025
White: RAL 9003